Description
• Eliminates the introduction of bubbles and airlocks into the cooling system and dramatically reduces system filling time.
• No more time-consuming system bleeding.
• Reduces fluid waste and messy spills.
• Automatically conducts system leak test.
• Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools.
• Simple operation requires workshop air supply and does not require fiddly interchange of vacuum and fluid hoses - as found on other versions of this tool.
• Can be used in conjunction with Model No's VS001, VS0011, VS0033, VS006, VS006F and VS006V cooling system pressure caps as an alternative way of connecting to the coolant reservoir.
• Supplied with 1.3m fluid hose.
• No more time-consuming system bleeding.
• Reduces fluid waste and messy spills.
• Automatically conducts system leak test.
• Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools.
• Simple operation requires workshop air supply and does not require fiddly interchange of vacuum and fluid hoses - as found on other versions of this tool.
• Can be used in conjunction with Model No's VS001, VS0011, VS0033, VS006, VS006F and VS006V cooling system pressure caps as an alternative way of connecting to the coolant reservoir.
• Supplied with 1.3m fluid hose.
Spare Parts
Specification & Documents
Air Consumption: |
12cfm |
Air Inlet Size: |
1/4"BSP |
Fluid Hose Length: |
1.3m |
Recommended Air Pressure: |
80-100psi |
Nett Weight: |
1.24kg |
Barcode: |
5054511308426 |
Instructions: |
