Description
• QUICK - Removal/installation of valve collets with the cylinder head in situ or on a workbench.
• REMOVE/INSTALL – By firmly pushing or tapping the tool with a hammer. The magnet in the tool captures the collets.
• IDEAL -For replacing broken valve springs or valve stem oil seals without removing the head from the engine.
• USE IN SITU - A suitable adaptor will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.
• INCLUDES - Two valve lapping tools with wooden shafts and four sizes of rubber suction cups.
• SUITABLE - For grinding most engine valves.
• STORAGE CASE – Keeps everything in one convenient place.
• REMOVE/INSTALL – By firmly pushing or tapping the tool with a hammer. The magnet in the tool captures the collets.
• IDEAL -For replacing broken valve springs or valve stem oil seals without removing the head from the engine.
• USE IN SITU - A suitable adaptor will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.
• INCLUDES - Two valve lapping tools with wooden shafts and four sizes of rubber suction cups.
• SUITABLE - For grinding most engine valves.
• STORAGE CASE – Keeps everything in one convenient place.
Spare Parts
Specification & Documents
Shaft Lengths: |
210, 225mm |
Suction Cup Sizes: |
Ø15, 20, 28, 34mm |
Nett Weight: |
1.52kg |
Barcode: |
5054630436154 |
